Prongs / Centres / Stebs
SKU:
CWA95
The revolving action of the CWA95 live or revolving centre eliminates scorching of the timber that can occur with the use of dead centres.Precision machined with a sealed for life bearing it resists sideways and downward thrust pressures and will enable even out of balance timbers to be worked confidently. No2 MT...Click for info
SKU:
CWA92
The Cup centre can be used to allow a whole to be cut through the centre of the cup while the work is still mounted onto the lathe....Click for info
SKU:
CWA80
Large 4 prong centre 7-8-in diameter for spindle turning. No. 1 morse taper.Fitted to the headstock for spindle turning; designed with a large head to give extra grip on large section timbers....Click for info
SKU:
CWA61
WOODSCREW CHUCK; 3-4-inx16tpi FOR CL AND DML LATHES; CAPACITIES UP TO 12 1-2-in DIA. IN WET WOODS.A versatile popular form of chucking; from the most delicate goblets up to 12-1-2-in wet wood bowls.The CWA61 woodscrew chuck is precision machined to an internal tolerance of +-- 3-10 of a thousandth of an inch; ensuring concentricity to minimse spiralling and chattering.Suitable for both hard and soft woods; this chuck is recommended for timber up to 12-1-2-in wide. As a general rule on a screw chuck you can turn up to five times the diameter of the chuck face.Ideal chucking solution for turning small items such as egg cups and fruit etc. For use on any lathe with a 3-4 x 16tpi spindle....Click for info
SKU:
CWA100
The CWA100 i- heavy duty revolving centre and is designed for use with large; heavy timbersDesigned for use with large; heavy timbers whether dry; wet or green. Machine ground on internal and external faces; the sealed for life twin bearings resist sideways and downward thrust pressures to enable out of balance timbers to be worked on with confidence....Click for info
Featured Products
